Laser
Large picture covering a few of the attachments as well.
Inside Laser
Inside the laser showing the plastic still mostly there, someone had a play by the looks of things.
Air Assist
Air assist and chain partially installed. This was as far as I got. £22 for the head
Rear of laser
This is the air assist pump and the water pump. I can't find how much I paid for the air assist pump.
A couple of elbows
Speaks for themselves.
Spare Air Assist connectors
To connect air assist to the head.
Laser safety glassses
https://mantechparts.co.uk/cart?cart_link_id=7ERse05m&country=GB Come down in prices since I bought them.
Original Controller board
This does not support Lightburn, but the new one is installed that does. Currently selling fo £60 off. here
Stainless steel Vent
With rain and bug screen.
Air extraction pump
You are familiar with these.
Cables and accessories
Still in original bag it came with.
Brass inserts
Drill a hole and use a soldering iron to push them in. VERY secure fitting for M5 and M3 bolts into any HDPE plastic sheet.
Both brass insert bags
See previous.
Black Welding spool
for welding black HDPE (DOH!).
White welding spool and welding gun
As above but for black.
Welding spares
Various nozzles and roller.
2 Large sheets of 10mm HDPE
1 metre by 1 metre almost £150 worth. this is really solid for making structural stuff like the battery boxes or brackets.
Laser with the lid down
Should probably have been at the top of this page.
25 Litres of Distilled water
This is the good stuff not the cheap de-ionised type.